Sealed Bottle Cap Tutorial
by Carol Bryce
BottleCapsGalore!
So you want to make your own sealed bottle caps for your DIY projects, but you aren't sure how? Well, here is your chance to learn! I am far from being an expert, but I have been making sealed bottle caps and things from them for about a year now and after MUCH trial and error, I am to the point where I am comfortable enough with my technique to share it with others. I know there are tutorials out there in cyberland that you can buy, but you can get it here for free. So, here we go!
You will need
One bottle cap. You can buy new ones on Etsy or you may reuse a clean beer bottle cap.
One one inch round image. You can use scrapbook paper or you can purchase collages inexpensively on Etsy. I would recommend printing collages commercially, like at Office Max. Most home printed ink jet prints fade and bleed when the sealer is applied. I would also recommend placing a coat of Aileene's Paper Glaze on scrapbook paper before using the 3D Crystal Lacquer. This will prevent any possible bleeding or fading. I have found that some scrapbook papers do fade or bleed, so I just place it on all scrapbook paper that I use. There is no need to use it on commercial prints.
A one inch circle punch for nice even images.
An adhesive to attach the image to the bottle cap. I have found that Crafty Chica gloss/varnish works the best. Yes, I know it's not an official adhesive, but it works great! I got mine at Michaels. If you can't find it, you can use Mod Podge.
A finish/sealer for your adhered image. I use 3D Crystal Lacquer. This is by far the best stuff I have used. Little to no bubbles and it dries to a nice mirror like shine.
A tissue or paper towel for blotting the adhesive.
A Popsicle stick-optional
A flat surface to place your finished cap on for drying.
So now that you have all of your supplies together, you are ready to create!
Once you have decided which side to use (for this tutorial, I will use the outside), place a small amount (a pea size amount) of your chosen adhesive to the cap and spread it evenly, either with the tip of the bottle or with a Popsicle stick. Apply carefully from the
Add your chosen image and place it on the cap,
Let it dry for about 15-30 mins.
Apply Aileene's Paper Glaze if you are using it and let it dry-about10-15mins.
Apply 3D Crystal Lacquer; do not shake the bottle. Using gentle squeezing pressure on the bottle, apply a thin line of lacquer in the middle, go around the edges and fill in the rest with the tip of the bottle(don't squeeze the bottle, just move the tip around. Do not use a circular motion, as this may form bubbles) making sure to cover the area evenly. If any bubbles form, just pop them
Let dry on a flat surface for 12 hours. I would recommend waiting at least two days before shipping or packaging to allow the sealer to dry entirely.